Consumer
Products
SENSEO® Latte Select Coffee pod machine

SENSEO® Latte Select Coffee pod machine

Fresh cappuccino and latte HD7850/61

Troubleshooting

How do I clean the SENSEO milk container?

For reliable performance of the milk container unit and consistently good frothing results from your SENSEO, it is very important that you follow the 2 cleaning procedures below.

Flushing after every use with the CLEAN button.

Flush the milk container unit with the CLEAN button immediately after use when you do not intend to froth milk again straight away.

Cleaning all parts after last use of the day.

You can clean the milk container, milk container lid and milk tube with hot water, some washing-up liquid and a brush, or clean them in the dishwasher.

Note: Always make sure that all parts of the milk container lid are opened or removed during cleaning.

Cleaning procedure 1

Flushing after every use with the CLEAN button.

Step 1:

Lift the milk container lever and remove the milk container unit from the machine.

Lifting the milk container lever

Step 2:

Rinse the milk container under the tap and fill it with cold water.

Rinsing the milk container

Step 3:

Reinsert the milk container and place an empty cup on the cup tray.

Reinserting the milk container

Step 4:

Press the CLEAN button.

CLEAN button

Cleaning procedure 2

Cleaning all parts after last use of the day.

Step 1:

Remove the milk container lid.

Remove the milk container lid

Step 2:

Open the milk container lid cover.

opening the milk container lid

Step 3:

Pull out the steam inlet.

steam inlet

Step 4:

Pull off the milk tube.

removing milk tube

Step 5:

Clean the milk container, milk container lid and milk tube with hot water with some washing-up liquid and a brush. Rinse the parts with fresh water after cleaning. You can also clean the milk container in the dishwasher.

cleaning

Step 6:

Push back the steam inlet (1), connect the milk tube firmly onto the connector of the milk container lid (2) and close the milk container lid cover (3).

reconnecting steam inlet

Step 7:

Reattach the lid and place the milk container unit in the machine, and press down the milk container lever.

placing the milk container unit in the machine

The information on this page applies to the following models: HD7850/61 , HD7850/80 , HD7850/60 .

Not what you are looking for?