Consumer
Products
SENSEO® Latte Duo Plus Coffee pod machine

SENSEO® Latte Duo Plus Coffee pod machine

Two cappuccinos in one go, Titanium Black, Integrated milk frother, Easy-clean function HD7857/50

Troubleshooting

How do I descale my SENSEO Latte Duo?

The descaling procedure consists of 4 cycles and takes about 65 minutes to complete:

  1. Descaling cycle (approx. 50 minutes)
  2. Three rinsing cycles (approx. 15 minutes)

Never interrupt the descaling or rinsing cycles.
Only citric acid-based descalers are suitable for descaling the SENSEO® machine.

Play Pause
You need Flash to see video.
Click here to download it.

1. Switch the machine on

LatteDuo - switch on

2. Mix 50 grams of citric acid with 1 litre of water in a measuring jug

Stir until the powder is completely dissolved.

mix 50 grams

3. Slide the milk spout into the machine

LatteDuo place milk spout

4. Fill the water reservoir with the descaler mixture

Then put the water reservoir back into the coffee machine.

LatteDuo place tank

5. Place the 1-cup holder with a used coffee pod inside into the coffee machine

Close the lid and make sure that it is properly locked.

The used pod serves as a filter during the descaling process.

LatteDuo place pod

6. Put a bowl with a capacity of at least 1 litre under the spout to collect the descaling mixture

LatteDuo place 1l-bowl

7. The machine is ready for descaling when the on/off button lights up continuously

Press the CALC button until the machine beeps twice to start the descaling cycle.

LatteDuo press-calc

8. During the descaling cycle, the descaling solution comes out of the machine in intervals

When all the descaling solution in the water reservoir has been used up after approximately 50 minutes, the on/off button flashes quickly and the CALC button flashes slowly.

Remove the used pad and clean the pod holder after descaling.

LatteDuo calc flush

9. Empty the bowl and place it back under the spout

LatteDuo-empty bowl

10. Rinse the water reservoir with running water and fill the water reservoir with fresh water up to the MAX indication

Then put the water reservoir back into the coffee machine.

LatteDuo empty fill tank

11. Press the CALC button to start the flushing cycle

The water flows continuously for approximately 5 minutes.

Wait until the machine has completed the flushing cycle, the on/off button flashes quickly and the CALC button flashes slowly.

LatteDuo press calc

12. Repeat steps 9-12 twice to complete the three flushing cycles

Once the last flushing cycle has finished, the machine switches off automatically.

The information on this page applies to the following models: HD7857/50 .

Not what you are looking for?