Consumer
Products

Troubleshooting

There are creases below my Philips ironing board cover

Creases underneath your Philips ironing board cover can prove inconvenient. Discover how to remove them to make ironing easier.

Board cover mounting instructions:

  1. Take the cover out of its packaging and unwrap it completely.
  2. First drape the smaller half of the cover on the smaller end of the board. Pull the other (larger) side of the cover and complete the draping on the larger side of the board.
  3. Flatten the cover completely, especially over the smaller half to ensure that the third layer is fully stretched and no creases are formed.
  4. First hook the cover on to the board by using the four button holes near the hinge of the board. Then, hook the cover using the two button holes near the air vents on the larger side of the board.
  5. For the first few uses, try to flatten the cover before folding the system for storage to ensure a long lasting flat surface.
  6. You are now ready to experience the never-burn cover.

The information on this page applies to the following models: GC9920/05 .

Not what you are looking for?

Did we answer your question?

If not, contact us.