Consumer
Products
PicoPix Pocket projector

PicoPix Pocket projector

70 lumens, with MP4 player PPX3407/EU

Troubleshooting

How to connect the Philips PicoPix 3407/3410/3411/3414 to a Windows Laptop ?

If your laptop has a VGA connector:

  1. Connect the optional VGA cable PPA1250 to the Picopix and to your laptop.
  2. Swicth on the Picopix and select the VGA source
  3. If the PicoPix is not detected, please activate the VGA output on your laptop.

If your laptop has Hdmi connector :

  1. Connect a standard Hdmi/mini Hdmi cable to the Picopix and to your laptop.
  2. Swicth on the Picopix and select the Hdmi source
  3. If the PicoPix is not detected please activate the Hdmi output on your laptop.

Please note:

  • If the projection doesn't start check that you are using resolution 800* 600.
  • Try to reboot your laptop.
  • Make sure that you are using the original Philips Picopix VGA cable PPA1250 or a certified (mini)HDMI cable
  • Check that the VGA*output/HDMI output of the computer is activated. For example, on some laptops, you will have to use the Fn+F5 or Fn+F7 to activate the VGA or HDMI output.

The information on this page applies to the following models: PPX3407/EU , PPX3410/EU .

Not what you are looking for?

Did we answer your question?

If not, contact us.