1
Products

PerfectDraft Home beer draft system

70 W, 6-l Kegs, 30 days of beer, 3°C, LCD display (temp, volume) HD3720/25

Troubleshooting

Beer leaks out of my Philips PerfectDraft

If you notice beer leaking out of your Philips PerfectDraft, there might be a simple solution to solve the issue. Use these possible causes and solutions to solve it yourself.

Tap handle is not firmly closed

If the tap handle of your Philips PerfectDraft is not closed correctly, you can open the handle a little and close it again.

Tap unit and the tube have not been placed correctly

Reinstall the tube of your Philips PerfectDraft by sliding it into the tap unit and pushing it down until you hear a 'click'. If you can move the arm of the connection top freely up and down, the tap unit is placed properly on the keg.

The keg is damaged

If the keg of your Philips PerfectDraft is damaged, you can install a new keg. Always use the new tube provided with each keg when you install a new keg.

There may be something wrong with the tube

You can reinstall the tube by sliding it into the tap of your Philips PerfectDraft unit and pushing it down until you hear a 'click'.

Did these steps not solve the issue? Please contact us for further assistance.

The information on this page applies to the following models: HD3720/25 , HD3720/26 , HD3620/25 , HD3610/50 , HD3620/20 , HD3620/21 . more less

Not what you are looking for?

Did we answer your question?

If not, contact us.