1
Products

Troubleshooting

How to setup my Philips recorder to have the same channel sequence as my TV?

Program with FOLLOW TV. 1. Press the remote 'TUNER' button, then 'SYSTEM MENU' button. 2. Press the cursor down to SETUP, press the cursor right button. 3. Press the cursor down to INSTALLATION, press the cursor right button. 4. Select YES, then press 'OK'. It will take several minutes till the menu is activated. 5. Press the cursor up/down to FOLLOW TV, press cursor right to start. 6. If the recorder recognizes that the TV has been connected with a euro cable, 'TV01' appears on screen. 7. Select the program number '1' on the TV. Confirm this with the 'OK' button on the recorder remote. If the channels match, this channel is stored at 'P01'. 8. Wait until 'TV02' appears. Repeat the previous two steps until all channels are stored. 9. Press the 'SYSTEM MENU' button to exit the menu.

The information on this page applies to the following models: DVDR725H/05 , HDRW720/05 .

Not what you are looking for?