Situation
Channels have to be (re) installed in the following situations:
• During the first installation of the TV
• When one or more channels are missing
• When switching to a different provider or signal type
How to (re)install channels? [DVB-C/T]
Checklist
Ensure that:
• An analog or DVB-C/T signal is received by the TV (no set-top box is used)
• All cables are firmly connected
Answer
To install TV channels directly onto the TV, proceed as follows:
- Press “Home” button on the remote control of the TV and select:
• [Antenna/cable installation] > [Search for channels] > [Re-install channels] > “select the country”
• Select [Antenna] or [Cable] and confirm with the “OK” button on the remote control.
• Select the cable provider and press “OK” on the remote control.
• Select [Digital and analogue channels] or [Only digital channels]
• The highlighted option is [Start]. Press the “OK” button to start the channel search.
or:
Select [Settings] to adjust the channel search manually (optional) :
- Manually adjust the search settings as preferred
Note : Contact the signal provider for more information on the settings below if a customized channel search is required.
[Frequency scan] > Example: Select [Full scan] if one or more channels are not found during the regular channel search.
[Symbol rate mode]
[Free/scrambled]
[Reset]
- Start the channel search
Select “Done” to confirm the settings. Select [Start] and press “OK” on the remote control to start the channel search.