Consumer
Products

Steam generator iron

Max 5.2 bar pump pressure, Up to 200 g steam boost, 1.3-l fixed water tank GC6704/36

Troubleshooting

My Philips steam generator iron no longer heats up

If your Philips steam generator iron stopped working or heating up, there can be several reasons. Please find out here how we can help you.

The power light or the LED light on the handle is blinking blue

If your iron is switched on and the blue power light or the LED light on the handle is blinking but the soleplate remains cold, your steam generator iron could be in auto shut-off mode.

When your iron has not been used for ten minutes, it enters auto shut-off mode. To use it again, please press the on/off button.

The iron no longer switches on

If this is the case, there might be an internal electric problem with your iron.

We recommend that you contact Philips Consumer Care and ask for a solution.

The information on this page applies to the following models: GC6704/36 , GC6709/26 , GC6730/36 , GC9682/86 , GC6833/36 , GC6830/26 , GC6733/26 , GC7057/20 , GC7805/20 , GC7833/80 , GC7808/40 , GC7055/20 , GC7717/80 , GC8712/20 , GC8733/20 , GC8715/20 , GC9650/80 , GC9642/60 , GC9410/60 , GC9405/80 , GC9324/20 , GC8735/80 , GC7710/20 , GC7715/80 , GC7703/20 , GC7705/30 , GC6627/30 , GC6630/20 , GC6606/20 , GC6603/20 , GC6612/30 , GC8643/30 , GC7035/20 , GC7037/27 , GC9630/20 , GC6602/20 , GC6611/30 , GC6621/20 , GC6625/30 , GC6631/30 , GC7015/20 , GC8651/10 , GC8616/30 , GC8638/20 , GC8650/80 , GC8630/02 , GC9241/02 , GC9236/02 , GC9231/02 , GC9222/02 , GC8640/02 , GC8635/02 , GC8615/02 , GC8620/02 , GC9230/02 , GC9235/02 , GC9220/02 , GC9240/02 . more less

Not what you are looking for?

Did we answer your question?

If not, contact us.