Smart Shaver series 7000
PEX v2.0 - Manual 1.0.8
You will find the power button and following indicators on your shaver
Sensitive shave setting
Press the power button to turn your shaver on and off.
You can also activate or deactivate the travel lock by pressing and holding the power button for 3 seconds.
If you need to reset the Bluetooth(TM) connection on the shaver with your app, then press and hold the power button for 8 seconds until the Bluetooth(TM) and notification indicator will blink slowly when the connection is successfully reset.
This indicator shows the battery level of your shaver
When the shaver's battery is running low, the indicator blinks orange to remind you to charge it. The indicator blinks white during charging and it appears solid white when the battery is full. You can also track the battery levels of your shaver on your app. Just make sure your shaver and app are connected.
You can customize your shaver to get the most comfortable shave for your skin. When your shaver is connected to the app, you can change the settings on the app to one of the following:
XS: Extra sensitive
When you start shaving for the first time, we recommend starting on the XS setting. Over time, as we help improve your irritation, we will give you a tip when the time is right for you to try another setting.
The travel lock is useful to prevent the shaver from accidently turning ON. Simply press and hold the power button for 3 seconds to activate or deactivate the travel lock.
When the travel lock is activated, the shaver's Bluetooth is also turned off. It will automatically switch ON when you deactivate the travel lock.
The shaver uses the latest BluetoothTM 4.0 to connect with your app and collect shave data to help guide you to reduce your skin irritation.
The Bluetooth(TM) connection is activated and remains ON after you turn your shaver ON for the first time.
If you need to deactivate the connection, then put the shaver into Travel Lock mode.
When there is an important message or skin irritation tip waiting for you in the app, this indicator will light up.
5-direction Dynamic Flex Heads
Gently follow the contours of the face and neck with shaver heads flexing easily in 5 directions. Less pressure is needed to shave closely and skin stress is minimized.
Thousands of tiny glass-like spheres reduce friction and surface resistance between the shaver and your skin and helps protect against skin irritation.
GentlePrecision PRO blades
Get maximum skin protection, even with a 3-day stubble. V-shaped blades guide the skin away from the blades for a close smooth shave.
SmartClick Beard Styler
You can change your look with the SmartClick Beard Styler attachment. Choose from 5 different length settings. Rounded tips and combs help prevent skin irritation.
Using the brush pre-shaving to enhance your shaving results: 91 % of subjects experienced less skin irritation when shaving with Philips S7000 with cleansing brush.
Rinse the shaving unit under the tap.
Remove the shaving head from the body.
Rinse the shaving head holder under the tap.
Cleaning your shaver is as easy as that and helps keep it in the best working condition to give you the best shave.
Take the orange retaining ring with your finger tips, turn it counterclockwise and lift it off the shaving head.
Each shaving head consists of a cutter and guard. Remove one shaving head from the shaving head holder. Remove the cutter from the comb. They are matching sets, so it is important to keep them together.
Please take the following steps for cleaning one shaving head at a time.
Clean the cutter under the tap.
Clean the guard under the tap.
Place the cutter back into the guard and put the shaving heads back into the shaving head holder, then turn them clockwise.
Note: hold the shaving head holder in your hand, when you reinsert the shaving heads and reattach the retaining rings. Do not place the shaving head holder on a surface when you do this, as this may cause damage.
Place the retaining ring back on the shaving head.
Re-attach the shaving head to the body.