My Philips Avent electric breast pump's suction is too low

Always use the original power adapter or charging cable that came with your pump. If you’ve purchased a newer model that didn’t include a power adapter, check your pump’s user manual and make sure the charging accessories match the recommended specifications.

For some Philips Avent electric breast pumps, a worn or older power adapter can affect the performance.

If you are using an older adapter version, contact Philips Consumer Care Center to check if a free-of-charge replacement is available.

The valve is the key to keeping good suction. It helps create the vacuum needed for effective milk expression.

Check that:

• The valve is fully closed when not in use
• The valve is not damaged, stretched, or misshapen
• During pumping, the pointed end of the valve does not open excessively

If the valve looks damaged or does not close fully, replace it.

Check:

• Valves
• Membranes
• Breast cushions
• Breast shields
• Inserts (if you use them with your breast pump)

Look for:

• Cracks
• Tears
• Holes
• Deformation
• Worn-out parts

If any part looks damaged or worn out, replace it.

Even a small air leak can reduce suction.

Make sure that:

• All parts are connected securely
• The pump is correctly assembled as described in the user manual
• Only Philips Avent parts are used
• Parts from different pump models are not mixed together

If possible, assemble the pump while the disinfected parts are still slightly moist. This can help make a better seal.

Milk residue or damaged parts can affect how well your pump works.

Before first use and after every pumping session:

• Disassemble all parts that come into contact with the breast and breast milk
• Clean and disinfect them as described in the user manual
• Handle the valve carefully

To clean the valve:

• Wash it gently in warm water with a small amount of dishwashing liquid
• Rub it gently between your fingers
• Do not insert any object into the valve

The suction level may be set too low.

Gradually increase the suction to a higher level, but still comfortable.

Use the highest setting that feels comfortable and does not cause pain.

For Philips Avent Natural Care Hands-free Wearable and Philips Avent Hands-free Electric Breast Pumps only

If your breast shield or insert isn’t the right size, it can make pumping less effective.

Signs of poor fit include:

• Little or no milk output
• Discomfort during pumping
• Excessive nipple rubbing

For Philips Avent Natural Care Hands-free Wearable Electric Breast Pump – see our FAQ article "How do I choose the correct breast shield/nipple insert size for my Wearable Breast Pump?"

 

For Philips Avent Hands-free Electric Breast Pump – see our FAQ article "How do I choose the correct breast shield/nipple insert size?"

Before pumping:

• Apply a warm towel to your breast
• Massage your breast gently
• Start with the stimulation mode before the expression mode

This may help start the let-down effect and support the milk flow.

If the issue continues after you have tried all the above-mentioned steps:

• Visit Philips Support online
• Contact Philips Customer Care
• Consult your healthcare professional or lactation consultant