If your laptop has a VGA connector:

• Connect the optional VGA cable PPA1250 to the Picopix and to your laptop.
• Turn on the Picopix and select the VGA source
• If the PicoPix is not detected, activate the VGA output on your laptop.

If your laptop has HDMI connector :
*Connect a standard Hdmi/mini Hdmi cable to the Picopix and to your laptop.

• Swicth on the Picopix and select the Hdmi source
• If the PicoPix is not detected, activate the Hdmi output on your laptop.

Please note:

• if the projection fails to start check that you are using resolution 800* 600.
• try to reboot your laptop.
• Check that you are using the original Philips Picopix VGA cable PPA1250 or a certified (mini)HDMI cable
• Check that the VGA*output/HDMI output on the computer is activated. For example, on some laptops, you will have to use the Fn+F5 or Fn+F7 to activate the VGA or HDMI output.

The information on this page applies to the following models: PPX3614/EU , PPX3610TV/EU , PPX3610/EU . Click here to show more product numbers  ›