Consumer
Products
PerfectDraft Home draught system

PerfectDraft Home draught system

HD3620/25

Troubleshooting

Beer leaks out of the appliance

1) The tap handle is not firmly closed.
You need to close the taphandle firmly. Open the handle a little and close it again.

2) The tap unit and the tube have not been placed correctly.
Make sure that the tap unit is placed correctly. Put the tap unit onto the connection top of the keg by pushing it down firmly. If you snap the tap unit onto the keg correctly, it fits nicely between the two chimes of the keg.

Tip: If you can move the arm of the connection top freely up and down, the tap unit is placed properly on the keg. Reinstall the tube by sliding it into the tap unit and pushing it down until you hear a 'click'.

3) The keg is damaged.
Install a new keg. Always use the new tube provided with each keg when you install a new keg.

4) There may be something wrong with the tube.
Try installing a new tube. Reinstall the tube by sliding it into the tap unit and pushing it down until you hear a 'click'.

To request a new tube, you can contact the PerfectDraft call centre in your country: for Belgium and Luxembourg +32 (0)78-250159, for Germany 01801-324000, for the Netherlands 0900-2224222)

When you contact us please have available:

  • The exact model number of the appliance (HD36xx)
  • The serial number of your appliance (you find it on the bottom of the appliance)
  • The expiry date of the keg
  • The production number of the keg (number under the expiry date)

The information on this page applies to the following models: HD3620/25 , HD3610/50 , HD3620/20 , HD3620/21 . more less

Not what you are looking for?

Did we answer your question?

If not, contact us.