My Philips EasyLife vacuum cleaner's suction power is low

Possible causes and solutions for loss of suction power:

Empty the dust container and clean the filter cone. For optimal performance, empty the dust container and clean the filter cone when the dust container full indicator is switched on.

To maintain optimal performance, clean the HEPA filter each time you empty the dust container. The HEPA dust container filter is attached to the dust container. The dust container foam filter is placed behind the HEPA dust container filter. Both filters can be rinsed under the tap. Let the filters dry completely before you put them back.

The HEPA Exhaust filter needs to be cleaned every 6 months. If you clean the filter with water, you can rinse it under the tap up to 4 times before you have to replace it with a new Philips HEPA exhaust filter. The filter needs to be replaced every 2 years.

The HEPA exhaust filter can be found under the HEPA exhaust filter grille.

To maintain optimal performance, clean the motor protection filter at least once a year. The motor protection filter is located in a holder inside the dust container compartment. The filter can be cleaned by shaking it out over a dustbin.

Remove any object that is blocking the air passage in the nozzle, hose or tube.

If the above solution did not help to solve your problem, please contact Philips Consumer Care.