1
Products

SENSEO® Latte Select Coffee pod machine

Fresh cappuccino and latte HD7850/61

Troubleshooting

How to descale my SENSEO® Latte Select

Descale your SENSEO® Latte Select regularly to ensure great-tasting coffee at the right temperature. Use the following instructions to descale your SENSEO® Latte Select Coffee Machine.

Play Pause

Prepare the descaling procedure

  1. Pour half a bottle of liquid descaler into the empty water tank
  2. Fill the water tank with fresh water up to the maximum indication
  3. Place the water tank back onto your SENSEO® Latte Select
  4. Open the lever to remove the milk container
  5. Insert the Calc-Clean tool into the coffee spout and close the lever until you hear a click

Start the descaling cycle

  1. Turn on your SENSEO® Latte Select and wait until the power light stops flashing
  2. Place the 1-cup pod holder with a used coffee pod inside it into the coffee machine. Close the lid and make sure it is properly locked
  3. Place an empty bowl with a capacity of at least 1.5 litres under the coffee spout
  4. Press the Calc-Clean button to start the descaling cycle
  5. All indicator lights on the control panel will light up sequentially to indicate that the descaling has started
  6. The descaling solution will come out in intervals
  7. The Calc-Clean indicator light will illuminate when the descaling cycle has finished
  8. Empty the bowl

The descaling cycle is now finished, continue with the rinsing cycles.

Start the first rinsing cycle

  1. Rinse the water tank under the tap
  2. Fill the water tank with fresh water up to the maximum indication
  3. Place an empty bowl with a capacity of at least 1.5 litre under the coffee spout
  4. Press the Calc-Clean button to start rinsing
  5. Water will come out in intervals
  6. The Calc-Clean indicator light will illuminate when the rinsing cycle has finished
  7. Empty the bowl
calc-clean tool inserting

Complete the rinsing cycles

  1. Remove the used coffee pod. Make sure to properly close the lid
  2. Rinse the water tank under the tap
  3. Fill the water tank with fresh water up to the maximum indication
  4. Place an empty bowl with a capacity of at least 1.5 litres under the coffee spout
  5. Press the Calc-Clean button to start the final rinsing cycle
  6. Water will come out in intervals
  7. The SENSEO® Latte Select will turn off automatically when the water tank is empty
Push the CALC-Clean knob to start descaling

Remove the Calc-Clean tool

Finally, remove the Calc-Clean tool from the spout in order to use your SENSEO® Latte Select. You will not be able to make coffee with the Calc-Clean tool still in place.

CALC-Clean indicator lights up

Rinsing cycle steps 9-10

9) Empty the water reservoir, rinse it and fill it with fresh cold water.
10) Press the CLEAN/CALC-CLEAN button to rinse the machine.
Note: During the rinsing cycle, the indicators on the control panel on the lid light up anticlockwise sequentially to indicate that the machine is rinsing.

rinse and fill water tank SENSEO latte Select

Rinsing cycle steps 11-13

11) Remove the pod from the pod holder and clean the pod holder to prevent the sieve in the centre from getting clogged.
12) Rinse the machine a second time by repeating steps 9 and 10 above.
13) Remove the Calc-Clean tool from the coffee spout. The descaling procedure is now finished and the machine is ready to brew coffee again.

The information on this page applies to the following models: HD7850/61 , HD7850/80 , HD7850/60 .

Not what you are looking for?

Did we answer your question?

If not, contact us.