PerfectDraft Home beer draft system

70 W, 6-l Kegs, 30 days of beer, 3°C, LCD display (temp, volume) HD3720/25


Too much foam comes out of my Philips PerfectDraft

If you have too much foam coming out of your Philips PerfectDraft, there might be several reasons why. Discover how to solve this yourself below.

The beer tap was not completely open

The beer tap of your Philips PerfectDraft needs to be completely open while the beer is being tapped. Always make sure the beer tap is completely open when you are pouring a beer.

The keg has been shaken too much

If the keg has been shaken too much, this might cause too much foam to come out of your Philips PerfectDraft. To solve this, wait half an hour for the beer to settle in the keg.

The tube is not functioning properly

If the tube of your Philips PerfectDraft is not functioning properly, too much foam may come out of the device. Always use the new tube provided with each keg.

The beer is too warm

If the beer is too warm, wait until it is cold enough to be poured. To understand this, make sure the temperature shown on the display is green.

Did these steps not solve the issue? Please contact us for further assistance.

The information on this page applies to the following models: HD3720/25 , HD3720/26 , HD3620/25 , HD3610/50 , HD3620/20 , HD3620/21 . more less

Not what you are looking for?

Did we answer your question?

If not, contact us.