My Philips Cordless Vacuum SpeedPro Max shows an error code
If you would like to know what the error codes in your Philips Cordless Vacuum SpeedPro Max mean, you can find the answer below.
E4 error code (or h3)
- An E4 error code (it might look like h3 if you look at the display upside down) means that the roller brush of your Philips Cordless Vacuum SpeedPro Max is blocked.
To solve this, please switch off your cordless vacuum, check the roller brush and remove any obstructions such as hair, fluff, dirt or dust.
E6 error code (or 93)
- An E6 error code (it might look like 93 if you look at it upside down) means that no current is being passed through the adapter of your Philips Cordless Vacuum SpeedPro Max.
To solve this, please double-check that the adapter of your cordless vacuum is properly inserted into the wall socket and the charging disc (magnet) is attached correctly. If the appliance does not work, please contact us.
E7 error code (or L3)
- An E7 error code (or L3 upside down) indicates that the wrong adapter is being used. Please make sure that you only use the correct adapter, which was originally provided with your cordless vacuum. If the correct adapter does not work, please contact us.
SE error code (or 35)
- An SE error code (or 35 if you look at it upside down) will indicate that your Philips Cordless Vacuum SpeedPro Max cannot work or be charged because the room temperature is too low, too high or there is a mechanical problem.
When the temperature in the room is too high (above or 40 degrees Celsius or 104 degrees Fahrenheit) or too low (below 5 degrees Celsius or 41 degrees Fahrenheit), disconnect the appliance from the charger and bring your Philips Cordless Vacuum SpeedPro Max to a room with a temperature at around 20 degrees Celcius or 68 degrees Fahrenheit.
Did these steps not solve the issue? Please contact us for further assistance.