0

Shopping cart

There are currently no items in your shopping cart.

    Philips Support

    How to clean my Philips AquaTrio Vacuum Cleaner after use

    Published on 09 January 2023
    Cleaning your Philips AquaTrio Vacuum Cleaner will help to keep your appliance in optimal condition. Depending on your model, please see below for the maintenance necessary to ensure long-lasting performance.

    1.1 AquaTrio 9000 series - Vacuum only set-up

    Dust bucket
    Regularly empty the dust bucket and make sure that the dirt never exceeds the 'Max' indication to prevent accelerated filter clogging. If necessary, remove the cyclone and clean any hair and dirt that is stuck in and under it. While you can rinse the cyclone under the tap, please make sure never to rinse the dust bucket. You can use a wet or dry cloth to clean the inside the of the dust bucket.
     
    Important Note: 
    • Please make sure that the electronic connectors inside the dust bucket remain dry to prevent the appliance from malfunctioning over time.
    • Do not clean the dust bucket in the dishwasher.
    • Do not rinse the dust bucket under the tap.

    Filter
    When the filter needs to be cleaned, the filter clean icon appears on the display (see image a) Take the foam filter out of the filter case, shake it over a waste bin to remove the dirt, rinse the foam filter under a tap and squeeze it to remove the water. Let the foam filter dry completely before you put it back into the filter holder. 

    Roller brush
    Dirt or hair can get trapped around the brush of your Philips cordless vacuum cleaner and may cause the roller brush to get stuck. You can slide the roller brush out of the LED nozzle with the locking lever. Then slide down the roller brush with your hand or use a pair of scissors through the groove on the roller brush to cut around any entangled hair or thread. For further instructions, see image b.

    Please watch the video: "How to clean your Vacuum Only set-up"
     
    Clean filter and roller brush

    1.2 Vacuum & Mop set-up 

    To prevent odours and scale deposits, please use the AUTOCLEAN function after every use to clean your full appliance in approximately 4 minutes (see image c). When AUTOCLEAN is ready, you can remove the microfibre brushes from the AquaSpin nozzle and store them in the dedicated holder on the storage station. 

    Important Note:
    • The microfibre brushes are not machine-washable.
    • Never use detergent for the AUTOCLEAN function as this might lead to excessive foaming.
    • Please make sure that the dirty water tank is connected correctly before running the AUTOCLEAN function to prevent water spilling from the tray. You should hear a "click" sound when connecting the dirty water tank. 
     
    For further step-by-step instructions, please check the video or user manual.
    Autoclean

    2. AquaTrio Pro

    Flushing the appliance 
    We advise you to flush the appliance after every use to prevent dirt from accumulating and bacteria from growing inside. If you do not flush the appliance after every use, this may lead to an unpleasant smell. 

    Cleaning parts 
    You can also clean each part separately for a thorough clean. The diagram in image a shows how each part of your Philips AquaTrio Pro can be cleaned.

    Cleaning the dirty water tank more thoroughly 
    For extra thorough cleaning, you can pull up the floater attached to the lid of the dirty water tank of the appliance. This enables you to rinse the bottom of the sieve and the floater properly (see image b).
    Tip: You can also place the dirty water tank in the dishwasher. 

    Cleaning the mopping brushes more thoroughly 
    The mopping brushes are cleaned when you flush your Philips AquaTrio Pro after use. If the brushes are still dirty after flushing, you can remove them from the nozzle and clean them with warm or cold running water (see image c) 
    Note: The mopping brushes are not machine washable!  
     
    Cleaning instructions mopping brushes: 
    1. Lift the mopping brushes out of the mopping nozzle by their lime green grips. 
    2. Clean the mopping brushes by rinsing them with running water. If you want, you can use a liquid household cleaner or some washing up liquid. 
    3. Put the mopping brushes on the clean mopping brush cover to dry. Drying can take approximately 24 hours.
    4. Place the dry brushes back. Make sure the mopping brushes are dry when they are placed into the appliance. If they are not dry, the active protection system may be activated when you switch on the appliance because the brushes encounter a too heavy resistance due to still being too wet.
    Cleaning the mopping brush cover 
    You can clean the mopping brush cover under the tap and with a damp cloth (see image d)
       
    Cleaning the mopping nozzle 
    You can clean the inside of the mopping nozzle and the mopping nozzle lid with a damp 
    cloth (see image e).   
    Cleaning AquaTrio Pro

    3. AquaTrio

    We strongly advise you to flush the appliance after every use to prevent dirt from accumulating and bacteria from growing inside (see video).

    Note: If you do not flush the appliance after every use, this may lead to an unpleasant smell.
    The dirty water tank should also be cleaned after every use to prevent the growth of bacteria and an unpleasant smell. If you have flushed your appliance and it remains dirty, you can clean each part separately.
    The diagram on image a shows how each part can be cleaned.

    Note: The mopping brushes are not washing-machine proof.

    Cleaning the clean water tank more thoroughly
    For extra thorough cleaning, you can pull up the floater attached to the lid of the dirty water tank. This enables you to rinse the bottom of the sieve and the floater properly (see image b).
    Tip: You can also place the dirty water tank in the dishwasher.

    Cleaning the mopping brushes more thoroughly
    The mopping brushes are cleaned when you flush your AquaTrio after use. If the brushes are still dirty after flushing, you can remove them from the nozzle and clean them with warm or cold running water.

    Cleaning instructions (see image c):
    1. Lift the mopping brushes out of the mopping nozzle by their lime green grips.
    2. Clean the mopping brushes by rinsing them with running water. If you want, you can use a liquid household cleaner or some washing up liquid.
    3. Put the mopping brushes on the clean mopping brush cover to dry. Drying can take approximately 24 hours.Note: To ensure proper drying, place one end of the brushes on the rim of the mopping brush cover.
    4. Replace the brushes. Make sure the mopping brushes are dry when they are placed into the appliance. If they are not dry, the active protection system may be activated when you switch on the appliance because the brushes encounter a too heavy resistance due to still being too wet.
    Cleaning AquaTrio

    The information on this page applies to the following models: XW9383/01 , FC7070/01 .

    Contacting Philips

    We are happy to help you

    Contacting Philips

    We are happy to help you

    Looking for something else?

    Discover all Philips Support options

    Our site can best be viewed with the latest version of Microsoft Edge, Google Chrome or Firefox.