4000 series Full HD Ultra-Slim LED TV

55 cm (22"), Full HD LED TV, DVB-T/T2/C 22PFT4031/05

Frequently Asked Questions

How to (re)install channels? [DVB-C/T] [4x31 model of 2016]

Channels have to be (re) installed in the following situations:
• During the first installation of the TV
• When one or more channels are missing
• When switching to a different provider or signal type


Ensure that:
• An analog or DVB-C/T signal is received by the TV (no set-top box is used)
• All cables are firmly connected


To install TV channels directly onto the TV, proceed as follows:

  1. Press “Home” button on the remote control of the TV and select:
    • [Antenna/cable installation] > [Search for channels] > [Re-install channels] > “select the country”
    • Select [Antenna] or [Cable] and confirm with the “OK” button on the remote control.
    • Select the cable provider and press “OK” on the remote control.
    • Select [Digital and analogue channels] or [Only digital channels]
    • The highlighted option is [Start]. Press the “OK” button to start the channel search.

Select [Settings] to adjust the channel search manually (optional) :

  1. Manually adjust the search settings as preferred

Note : Contact the signal provider for more information on the settings below if a customized channel search is required.

[Frequency scan] > Example: Select [Full scan] if one or more channels are not found during the regular channel search.
[Symbol rate mode]

  1. Start the channel search
    Select “Done” to confirm the settings. Select [Start] and press “OK” on the remote control to start the channel search.

The information on this page applies to the following models: 22PFT4031/05 , 24PHT4031/05 , 32PHT4131/05 , 43PFT4131/05 , 49PFT4131/05 . more less

Not what you are looking for?

Did we answer your question?

If not, contact us.